Sunday 17 October 2010

Totally Frightful!

Hi Everyone. Today I would like to share with you a project I completed for the latest Cuttlebug Blog Spot challenge. If you popped on over to the Cuttlebug Blog Spot site last week and saw all the other DT members creations you would have seen some amazing and inspirational ideas. All completely different and creative in their own right. I suspect this weeks challenge will be equally as spectacular! or seeing as it's another Halloween theme, maybe that should be as equally SPOOKtacular!!
We were asked to create something under the theme "Totally Frightful!!" A difficult concept to create with paper and embossing folders perhaps,but here is what I came up with..
And here's a step by step how it was made...I cut out some leaves using the Tim Holtz cutting die called Tattered Leaves in some Onyx coloured Glitter Card stock from Best Creations. I always thought Onyx was Black! Shows what I know eh!Now, although this die is from Sizziz and is one of their Bigz dies, all you Cuttlebug owners out there, don't think you can't use these dies in your machines. Just take away your Cuttlebug "A" plate and use the die as your base.Adding your card stock and then your two "B" plates on top.Once the leaves were cut out I popped them into one of the Embossing Folders from the Halloween & Poison Embossing Folder sets and passed them through the Cuttlebug.Close up, I can see the impression on the leaves, although it has proved difficult for me to get a decent picture to show you on here! Wheres David Baily when you need him? As previously stated, Photography is not my strong point!I cut out a ring from my Cricut Machine using the Roly Poly function on the Plantin Schoolbook Cartridge in the same "Onyx" Glitter Card stock.I teased the leaves over the edge of my craft desk to give them some dimensionand applied them to the ring with some Pinflair Silicone Glue. The card stock I used was coated on the back, so no other adhesive I had at hand would stick to it, so therefore the Silicone Glue was my best option for this project.I then set about cutting out my shapes for the Roses. I used the Tim Holtz Tattered Florals die.I cut my Black Glitter card to 4" x 4" as I only wanted to cut out one of the flower shapes which is on this die, therefore saving card stock.. wooohoooo!!Again, this was cut out using the Cuttlebugwith the die and plates positioned as before..I then popped each flower shape into one of the Embossing Folders from the Halloween Words & Cobwebs sets and passed it through the bugto add texture to each shape.
Each Rose consists of 3 flower shapes. There are 8 Roses on this project so you will need 24 flower shapes if my maths is correct!On one of the sets of 3 shapes, cut from the base of one of the petals to the middle of the flower. On the second, cut off one of the petals and on the last flower shape, cut off two petals.Then, on the largest shapes fold the layers on each flower back over themselves to form a cone sort of shape. I stuck these down with some High Tac double sided tape. Again, because this was coated card, my Glue of choice, Glossy Accents was too wet to hold the shapes in place.You'll notice the rolled up shape at the front of the picture.This is the cut off 2 petals rolled into a cigar shape, this will form the centre of your Rose and is attached to the single petal that you cut off.Stack the 3 large layers together, using some of the Pinflair Silicone Glue to hold them in place.Adding the centre piece to complete the Rose.Repeat this process for all of your Roses.Then add them to your wreath. Again, gluing them into place with the Silicone.
This is going to make such a great Christmas wreath I think, but using more traditional colours though!! I'll have to make some time to get that one done! Anyway, back to Halloween!
Now, what to put the wreath on?! The wreath itself is quite flimsy, it is only lightweight card stock after all. So it really won't stand up to being hung on a door or wall by itself. I was going to back it onto some chip board (grey board) but I was wandering around Asda (Wallmart) last weekand came across this in their Halloween Isle. It's a polystyrene (Styrofoam) Tomb Stone. And at £5 for 3 they were a bargain and I totally stocked up. They will be great for decorating the shop if nothing else... But also had the potential for displaying my wreath. I love it when a plan comes together!!However, when I placed the wreath on the front of the tomb stone it covered up the wording.So, I turned it over to reveal the plain back which would be perfect.. whoopp, whoopp..So, before adding the wreath, I cut out some letters from The Happy Hauntings Cricut Cartridge in both Silver and Gun Metal Mirror card.I embossed the Gun Metal images using the Distressed Stripes Cuttlebug Embossing Folder.Mounted the images on top of each other to give shadow and dimensionand then applied then to the tomb stone,before adding the wreath...A long project, but totally worth it I think and something you could use year after year.
I hope you like it and it gives you some ideas for your Halloween decorations?
Don't forget to pop on over to the Cuttlebug Blog Spot to see what the other DT Members have come up with when they are posted, or why not even take part in the challenge yorself.
Thanks for checking us out, see you soon.
Andy.

20 comments:

  1. Really fab Andy, another super project and I look forward to seeing your Christmas version. The shop will look great this year for Spook Night - especially if you are all dressing up this time.

    Toni :o)

    ReplyDelete
  2. Wow, Andy, you've just gone and done it again! You've captured that eerie, haunted look so spooktacularly. I have images of black plumed horses and carriages, and vampires and ghouls in black veiled funereal garb.............racing thru my head .........say no more!!!! Very well done ... see you soon .. French Lin ..xx..

    ReplyDelete
  3. Love the black rose tombstone Andy. I love that you take the time to create your projects and put a lot of thought into them. That is what makes them your masterpieces! Awesome take on the challenge!

    Hugz, x

    ~L~

    ReplyDelete
  4. thank you for such an inspirational tutorial..it is well written and have so much info in it. The flower is fabulous!

    ReplyDelete
  5. Hi Andy, it's amazing what you have made this Challenge! You can see a lot of work has been put in it! It look really real!!

    Jannie X

    ReplyDelete
  6. great project. i love the choice papers for the "RIP"

    ReplyDelete
  7. This is fabulous - those flowers are gorgeous!
    Helen x

    ReplyDelete
  8. andy, your black embossing roses are a major hit in my book...and "my time will come" when I will be able to make them, :)

    Thanks for your tutorials, i appreciate them!

    ReplyDelete
  9. Wonderful project! So very creative!

    ReplyDelete
  10. just found you blog today, lots of talent.

    ReplyDelete
  11. Very cool Andy! I didn't realize how big it was! FABULOUS! Glad you did the close ups of the flowers to get the magnificent detail! xxD

    ReplyDelete
  12. What a scary project. So glad you didn't add my name to the tombstone! Yikes! Love the tutorial for the flowers. A great added bonus! Have a great week.

    ReplyDelete
  13. you are an amazing crafter...all i can say is WOW...so much inspiration...love it

    ReplyDelete
  14. Andy, this is too cool and soooo clever. Thanks for the tuts.

    ReplyDelete
  15. Wow Andy, your project is great.Your roses are just lovely and look great in black.

    ReplyDelete
  16. Wow wow and wow both cards so very different so both so sssssssssssstunning. Love them both.

    Well done you clever man.
    Lyn (wed)

    ReplyDelete
  17. oh wow Andy this is a wonderfully spooky project! What a great way to deorate those Asda tombstones and love the embossed glitter leaves and flowers.
    uliex

    ReplyDelete
  18. The flowers are AMAZING! I love how you ran them through the spiderweb Cuttlebug folder! Brilliant!

    ReplyDelete
  19. This is a great project and very effective. Love the flowers they really are pretty.
    Kim xXx

    ReplyDelete